Nomax
Electrical Steel Pvt. Ltd manufactures the following products :
We manufacture Transformer Core Laminations for Power and
Distrubution Transformer ranging from 10 KVA to 200000 KVA
from Cold Rolled Grain Oriented (CRGO) steel in grades M2, M3,
M4, M5, M6 and also the Hi-B CRGO grades of ZH, ZDKH, ZDMH,
ORSI-H, TCH-O, TCH-1 etc. For more technical details on the
various grades of CRGO steel
We are able to deliver CRGO Transformer Lamination Cores as
leg or sheet packet, according to your packing requirements,
inside of wooden box or on the pallets.
Step-lap
CRGO Transformer Lamination Core
The
Step-lap CRGO Transformer Laminations design leads to low
no-load losses and a low noise level, lateral step-lap enables
a favourable assembly for the upper yoke. Every type of CRGO
Transformer Cores can be produced in a form of Step lap, over
lap, 45° cut, with hole or without hole from every required
quality electrical steel up to 800 mm width.
Nomax Electrical Steel Pvt. ltd. uses the newest, computerized version of
Cut to Length Machines in order to produce Step-Lap CRGO
Transformer Laminations Cores.
For information on various grades and
properties of CRGO
CRGO Transformer
Lamination Core 
Nomax
Electrical Steel Pvt. Ltd manufactures the following products :
We manufacture Transformer Core Laminations for Power and
Distrubution Transformer ranging from 10 KVA to 200000 KVA
from Cold Rolled Grain Oriented (CRGO) steel in grades M2, M3,
M4, M5, M6 and also the Hi-B CRGO grades of ZH, ZDKH, ZDMH,
ORSI-H, TCH-O, TCH-1 etc. For more technical details on the
various grades of CRGO steel
The
Step-lap CRGO Transformer Laminations design leads to low
no-load losses and a low noise level, lateral step-lap enables
a favourable assembly for the upper yoke. Every type of CRGO
Transformer Cores can be produced in a form of Step lap, over
lap, 45° cut, with hole or without hole from every required
quality electrical steel up to 800 mm width. 